Decal Installation Instructions

Step 1
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2
Rub a squeegee or credit card firmly across the sticker through the clear transfer tape to prepare it for application. This ensures the sticker will cling to the transfer tape and removes any air bubbles that may have formed.

Step 3
SLOWLY peel the paper backing off the sticker. This is done easiest by placing the decal FACE DOWN on a flat surface. Then peel the paper backing off making sure the decal sticks to the application tape that is on the front of the decal. If the decal is sticking to the backing and not the application tape you need to apply pressure in that area until it does.

Step 4
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait a few hours before moving to the next step.

Step 5
SLOWLY peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.